If you have any issues completing these instructions, please email us at hello@cherrylivelight.com.

Estimated time to complete this installation: 5-10 minutes


  • MacOS Catalina
  • One of the supported digital audio workstations (DAWs):
  • Philips Hue Bridge with at least one Hue bulb connected
    • If you don’t have a Hue system, we recommend this kit
    • The WiZ Hue lights are not compatible with Cherry (yet)
    • You must have a Hue Bridge, even if your bulbs support Bluetooth connections
  • Cherry Live Light Beta downloaded to your computer.

Step 1: Connect Cherry to Hue Bridge

Extract the downloaded .zip file by double-tapping it. The app icon should appear next to the .zip file. (Don’t worry if the number inside the parentheses, like b28 or b101, etc. doesn’t match the screenshots on this page, higher numbers just mean that you are running a newer better version!)

Run the newly-extracted app by double-tapping it.

Tap Open on the internet download prompt.

Internet download security prompt

Next, Mac OS may ask you to allow network connections. Cherry Live Light requires network access to control your Hue lights, so click Allow if this window appears.

When the app opens, it will automatically search for a Hue Bridge. If it finds one, it will ask you to press the circular button on the bridge. Press the button and hold it for about 1 second before releasing it. You should not have to do this again unless you re-download the app or replace your bridge – next time you launch the app, it should connect automatically.

Cherry should finish connecting to your bridge in a few seconds and you should see something like the image below. If you have allowed network connections, have waited 30 seconds, and still do not see a “Connected to Hue Bridge” status message like the image below, please try restarting the app. If you are still unable to connect, please contact us using the email at the top of this page.

Successful Hue connection on Cherry 1.0

Step 2: Connect DAW to Cherry

Choose your DAW from the list below and follow the instructions.

Logic Pro X

Open Logic. Navigate to Logic Pro X > Control Surfaces > Setup… in the menu.

Accessing Control Surfaces

Select New > Install… using the drop-down in the upper left of the Control Surface Setup window that appears.

Adding a Control Surface

Keep the default selection (Recording Light) and press the Add button in the lower-left of the Install window that appears.

Choosing the type of Control Surface to add

Back in the Control Surfaces window, select the new Recording Light you just added and bring up the Inspector by pressing the i key. Click the Output Port row and choose Cherry. The other options can stay unchanged.

Setting Cherry as the Output Port for your Control Surface

You can now close the Control Surface Setup window.


In REAPER, open Options > Preferences using the menu.

In the window that appears, choose Control/OSC/web near the bottom of the left panel (you may have to scroll).

Click the Add button to add a new control surface.

In the window that appears, choose Frontier AlphaTrack in the Control Surface mode drop-down.

In the MIDI Output dropdown that appears, choose Cherry. The MIDI Input dropdown can remain blank, empty, or None.

Press OK and your control surface should now be listed.

Press OK to return to the main REAPER interface.

Pro Tools

Ensure that Cherry is running.

First, enable the global MIDI input for Cherry. In the Pro Tools menu, open Setup > MIDI > MIDI Input Devices…

In the MIDI Input Enable window that appears, check the box next to Cherry Input, then tap OK to close the window.

Next, add Cherry as a HUI peripheral. In the Pro Tools menu, open Setup > Peripherals.

In the Peripherals window that appears, go to the MIDI Controllers tab.

Choose a row that is not already being used. Set the Type to HUI, Receive From to Cherry Input, Send To to Cherry, and leave # Ch’s at 8.

Tap OK to close the window.

Studio One 5

Tested on Studio One 5 Prime

Ensure that Cherry is running.

In the menu bar, open Studio One > Preferences.

In the Preferences window that opens, go to the External Devices tab and click the Add… button.

In the Add Device window that opens, choose Mackie > HUI in the panel on the left (you may have to scroll to find it). In the Send To dropdown on the right, Choose Cherry.

Click the OK button to close the Add Device window. The new device should be listed.

Click OK to close the preferences window.


Tested on Cubase LE AI Elements 10.5

Ensure that Cherry is running.

In the menu bar, open Studio > Studio Setup…

In the Studio Setup window that appears, choose Remote Devices in the left panel.

Click the + button in the upper left and choose Mackie HUI.

Select Cherry in the MIDI Output dropdown in the right panel.

Tap the OK button to close the Studio Setup window.

Step 3: Enjoy

Your selected light will turn red when you begin recording, and will switch back to its original color (or turn back off) when you stop recording.

You can control the brightness of the red light using the brightness slider in Cherry.